Demolition
Xactimate Code DMO|DMODUMP — Demolition
Category Demolition, measured in LO.
- SEL code
- DMO|DMODUMP
- Unit of measure
- LO
- Category
- Demolition (DMO)
- Price
- Varies by price list and region — why pricing varies by region
Real-world usage of DMO|DMODUMP
Appears in 67 of 358 scopes ESXPress has analysed and in 69 of 543 converted customer scopes — referenced by the ESXPress Completeness Advisor. Usage is measured from real claim documents, never estimated. How this is measured.
How it's written in real claims
From 78 line items across 67 scopes processed through ESXPress — the exact operation text and unit of measure adjusters actually write:
- “Dumpster load - Approx. 20 yards, 4 tons of debris”72 lines
- “Haul debris - per pickup truck load - including dump”5 lines
- “Dumpster load - Approx.”1 line
Dominant unit of measure: EA — used in 94% of samples.
What the Completeness Advisor checks on DMO|DMODUMP
2 ESXPress completeness checks reference this code. Together they name the items most often left out of a scope like this one:
- R21-DEMO-DUMPSTER Torn-off roofing and demolished materials have to go somewhere - a dumpster is the standard way.
- R99-CLN-DEBRISBAG Exclusion selector in Completeness Advisor rule R99-CLN-DEBRISBAG — not suggested when that rule fires.
Frequently estimated with DMO|DMODUMP
Codes measured in the same claim scopes as DMO|DMODUMP, from scopes processed through ESXPress. The count is how many scopes carried both lines.
- RFG|RFGARMVN (in 16 scopes)
- RFG|RFG240S (in 20 scopes)
- RFG|RFGMISC (in 12 scopes)
- RFG|RFGGCR300 (in 7 scopes)
- PNT|PNTMN (in 7 scopes)
- PNT|PNTP (in 7 scopes)
- RFG|RFGFELTL15 (in 6 scopes)
- PNT|PNTACP (in 6 scopes)
Most-used Demolition codes
Other Demolition (DMO) codes ranked by how often each appears in the claim scopes ESXPress has processed, most-used first. Every code below carries its own measured-usage page.
- DMO|DMOPU (65 scopes)
- DMO|DMODTRLR (54 scopes)
- DMO|DMODUMP< (24 scopes)
- DMO|DMODUMP> (19 scopes)
- DMO|DMOTREEBID (8 scopes)
- DMO|DMODUMP>> (6 scopes)
What it is
DMO|DMODUMP is the Xactimate SEL code for a dumpster of approximately 20 cubic yards — about 4 tons of debris — measured per dumpster load.
It belongs to the Demolition (DMO) category. The standard unit of measure is LO (load), but the processed scopes shows adjusters writing the line in EA in practice: 73 of the 78 observed line items (93.6%) used EA, and the unitAsUsed analysis puts EA at a 93.6% share.
DMO|DMODUMP appears in 67 of the 358 scopes analysed (about 18.7%) and in 9 of the 61 converted customer scopes. ESXPress observed 78 line items. It is the most frequently used Demolition category code in the processed scopes and the second most common non-roofing code after the gutter flagship.
When to use it
Use DMO|DMODUMP when the scope needs a container for the debris produced by demolition or tear-off work. The Completeness Advisor’s R21-DEMO-DUMPSTER rule states it plainly: “Torn-off roofing and demolished materials have to go somewhere - a dumpster is the standard way.” The rule suggests this code when a demolition scope is reviewed, and the usage evidence agrees — the line appears in 18.7% of all scopes in the processed scopes.
The observed act text is “Dumpster load - Approx. 20 yards, 4 tons of debris” (72 of the 78 sampled lines, 92.3%), which tracks the standard description almost word for word. A minority of lines (5 of 78) instead describe hauling by pickup truck — “Haul debris - per pickup truck load - including dump” — which is the alternative when the scope calls for truck-load hauling rather than a dumpster. Shorthand “Dumpster load - Approx.” appears once.
How to use it
Write the line in EA with the quantity equal to the number of dumpster loads — one dumpster is qty 1. This is the unit the processed scopes show adjusters using (93.6% of sampled lines) even though the standard unit is LO. An ESX conversion that follows real-world usage writes EA; matching the act text keeps the line recognisable when the carrier’s scope is compared line for line.
The standard line text is “Dumpster load - Approx. 20 yards, 4 tons of debris”. The “Approx.” qualifier matters: the dumpster size is approximate, so the line covers a 20-yard container of up to about 4 tons — it is not a per-ton line. For truck-load hauling the evidence shows “Haul debris - per pickup truck load - including dump” with the same EA unit, one unit per truck load.
The Completeness Advisor’s R99-CLN-DEBRISBAG rule is an exclusion selector for this code: in flows where that rule fires, the Advisor does not suggest DMO|DMODUMP because the debris-removal path is already accounted for. The co-occurrence data below shows the dumpster rides along with roofing work — five of the eight paired codes are Roofing (RFG) lines — matching the R21 rule note that torn-off roofing is the usual source of the debris.
Often used together
Two kinds of related codes are listed below. First, codes that appear in the same scopes as DMO|DMODUMP — co-occurrence measured across the claim scopes processed through ESXPress with support of at least 3 scopes and lift of at least 1.5. Second, other frequently used Demolition (DMO) category codes, ranked by how often they appear in the analysed scopes. Descriptions are from the ESXPress code reference.
Real-world examples
Each example is an anonymised line from a processed claim scope: the exact operation text and unit of measure adjusters wrote, with the observed line-item count. The count is line frequency across the analysed samples — never a price and never a quantity from a specific claim.
- In a real claim, this line appeared as: “Dumpster load - Approx. 20 yards, 4 tons of debris”, EA, qty 72.
- In a real claim, this line appeared as: “Haul debris - per pickup truck load - including dump”, EA, qty 5.
- In a real claim, this line appeared as: “Dumpster load - Approx.”, EA, qty 1.
Questions & answers about DMO|DMODUMP
When is DMO|DMODUMP used in Xactimate?
It is the line item for a dumpster of roughly 20 cubic yards (about 4 tons of debris). The Completeness Advisor’s R21-DEMO-DUMPSTER rule describes it as the standard way to handle torn-off roofing and demolished materials, and the processed scopes shows the line in 18.7% of all scopes.
What unit is DMO|DMODUMP measured in?
In practice, EA — 73 of 78 observed line items (93.6%) used EA, even though the standard unit is LO (load).
What does DMO|DMODUMP get used with?
Mostly roofing work: five of its eight paired codes are RFG lines, led by tear-off (RFG|RFG240S, 20 scopes; RFG|RFGARMVN, 16) and paint lines (PNT|PNTMN, 7; PNT|PNTP, 7).
How often does DMO|DMODUMP appear in real claims?
In 67 of the 358 scopes ESXPress analysed (about 18.7%), and in 9 of the 61 converted customer scopes — 78 line items observed.
Browse all Demolition codes (DMO)
Need the full picture? Convert a carrier scope PDF to an import-ready Xactimate ESX file with every line mapped to its correct SEL code — Convert PDF to ESX or read the step-by-step guide.
Convert a scope PDF to an import-ready ESX file
Every line mapped to its correct Xactimate SEL code — accurate, code-matched, and ready for Xactimate.
Xactimate is a registered trademark of Verisk Analytics. ESXPress is an independent tool and is not affiliated with or endorsed by Verisk. Prices are not published. Usage and pairing data are measured from claim scopes processed through ESXPress. Built by Chaz Jaco.